Norwood door sets are suitable for a wide range of applications, including fire doors, security doors, personnel, and acoustic door set options.
Norwood doors are manufactured using high quality steel and can be integrated with various types of walling while offering full flexibility and demountability.
We utilise a 1.2mm gauge mild steel for the leaf and 1.5mm
gauge mild steel for the frame. The door set is finished in a
high-quality RAL/BS exterior grade polyester coating, applied
at 18-20 micron dry film thickness over 4-6 microns of epoxy
anti-corrosive prime.
The door width, height and frame thickness are tailormade to customers’ requirements. Ironmongery is applied before delivery to the site to reduce installation and programme. There are various ironmongery packages available manufactured to meet project specifications.
We can design, manufacture and install automated door sets incorporating push buttons, infrared sensors and interlocking systems. We hold an ADSA membership, which promotes the highest standards in automatic doors manufacture. Our in-house ADSA qualified operatives can certify our automatic doors to BS 7036: 1988.
Our BIM Revit files and relevant certification are available on request – please fill in our Get In Touch form or email [email protected]
As part of the project to deliver ISO4 - ISO7 classified cleanrooms we provided our Mediline partition system along with walk on ceiling and fire rated doors.
One of the key solutions we offered was our ADSA certified, automatic hermetically sealing sliding door system with large vision panels.
We designed and installed Mediline partitions, walk on ceilings and doors to create a new ISO7 and ISO8 production facility.
Stay up to date with industry insights and get inspired with innovative products and projects delivered to your inbox.
One piece fully welded flush frame, which is manufactured in 1.5mm mild steel
44mm thick steel leaf with a honeycomb bonded core, fully sealed all round and manufactured in 1.2mm mild steel
Fully flush double glazed units with either 6.4mm laminated glass or 6mm toughened glass
All steel frames and leaves are factory finished in high epoxy polyester powder coating, applied at 18-20 microns dry film thickness over 4-6 microns of anti-corrosive primer as supplied by BASF. The gloss level will be 35% +/- 5% depending on substrate interaction
Class O Spread of Flame (BS: 476-6 & 7).
Single Door – 60/60 min insulation/ integrity
(BS476-22)
Double Door – 60/60 min insulation/ integrity
(BS476-22)
3 No. SSA ball bearing hinges (included within the door frames) per leaf
SSA pull handle
Push plates.
Overhead door closers
Project specific ironmongery can be accommodated
Options of single leaf or bi-parting to provide clear openings of either 900mm or up 2500mm.
Manufactured to clients’ specifications
Norwood doors as standard are mild steel powder coated, however we can offer Stainless Steel, GRP, Glass and Timber doors
Please enter your details below and we will email you the Data Sheet.
0161 696 5100
To get in touch with one of our experienced consultants, please fill out the short form below and we’ll be in touch with you as soon as possible.
0161 696 5100
